Aps Embedded Systems

OPERATING MODES  SKIN MODE: In Skin mode heater power is controlled with reference to Skin probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.  AIR MODE: In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.   MANUAL: MODE In manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed) and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off. Special attention is needed while operating without
ALERTS  Power fail: Power fail indicator turns ON with sound alert (cannot be muted).  Probe fail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp display.  Heater overload: Heater overload indicator turns ON.  Low temperature: Low alarm indicator turns ON with sound alert (can be muted). Displays blinks.  High temperature: High alarm indicator turns ON with sound alert (can be muted). Displays blinks.  Manual mode Time out: Short sound alert and timer flashing on LCD.

Additional Information:

• Production Capacity: 1000pcs per month

OPERATING MODES

 SKIN MODE:In Skin mode heater power is controlled with reference to Skin probe. In case when the temperatureexceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.

AIR MODE:In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceedsMax ( 38 °C or 101 °F) in any probe Heater is turned off.

MANUAL: MODEIn manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed)and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 101 °F) inany probe Heater is turned off. Special attention is needed while operating without probes.

DISPLAY INDICATION

LCD:LCD displays the following information.I. Current ModeII. Heating speedIII. Alerts: Low Temp, High Temp, Probe failIV. Settings: Set Temp, Low Alarm, High Alarm, Manual mode timer, Calibration, Product brandingV. APGAR timer

7 SEGMENT DISPLAY(1 inch Large Display):Displays current Skin and Air temperature, blinks for out of range (Low and high alarm) and clears uponprobe fail.

ALERTS

Power fail: Power fail indicator turns ON with sound alert (cannot be muted).

Probe fail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp display.

Heater overload: Heater overload indicator turns ON.

Low temperature: Low alarm indicator turns ON with sound alert (can be muted). Displays blinks.

High temperature: High alarm indicator turns ON with sound alert (can be muted). Displays blinks.

Manual mode Time out: Short sound alert and timer flashing on LCD.

Manufactured in Mumbai, Maharashtra, India

We deal in Andhra Pradesh, Arunachal Pradesh, Assam,Bihar, Patna, Chhattisgarh, Raipur, Goa, Panaji, Gujarat, surat, ahemdabad, baroda, Gandhinagar, Haryana, Chandigarh, Himachal Pradesh, Shimla, Jharkhand, Ranchi, Karnataka, Bangalore, Kerala,Thiruvananthapuram, Madhya Pradesh, Bhopal, Maharashtra, Mumbai, Manipur, Imphal, Meghalaya, Shillong, Mizoram, Aizawl, Nagaland, Kohima, Odisha, Bhubaneshwar, Punjab, Chandigarh,Rajasthan, Jaipur, Sikkim, Gangtok, Tamil Nadu, Chennai, Telangana, Hyderabad, Tripura, Agartala, Uttarakhand, Dehradun, Uttar Pradesh, Lucknow, West Bengal

Additional Information:

• Production Capacity: 100
• Delivery Time: Ready Stock
• Packaging Details: Box Containing 1. Infant Warmer Touch Controller. 2. Skin sensor Probe. 3. Air Sensor Probe. 4. 650W High Quality Ceramic Heater. 5. Supply Transformer. 6. Sensor Male connectors. 7. Wires and Stickers. 8. Switches and Sockets

OPERATING MODES SKIN MODE:In Skin mode heater power is controlled with reference to Skin probe. In case when the temperatureexceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off. AIR MODE:In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceedsMax ( 38 °C or 101 °F) in any probe Heater is turned off. MANUAL: MODEIn manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed)and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 101 °F) inany probe Heater is turned off. Special attention is needed while operating without probes.

DISPLAY INDICATION LCD:LCD displays the following information.I. Current ModeII. Heating speedIII. Alerts: Low Temp, High Temp, Probe failIV. Settings: Set Temp, Low Alarm, High Alarm, Manual mode timer, Calibration, Product brandingV. APGAR timer 7 SEGMENT DISPLAY(1 inch Large Display):Displays current Skin and Air temperature, blinks for out of range (Low and high alarm) and clears uponprobe fail.

ALERTS Power fail: Power fail indicator turns ON with sound alert (cannot be muted). Probe fail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp display. Heater overload: Heater overload indicator turns ON. Low temperature: Low alarm indicator turns ON with sound alert (can be muted). Displays blinks. High temperature: High alarm indicator turns ON with sound alert (can be muted). Displays blinks. Manual mode Time out: Short sound alert and timer flashing on LCD.

Additional Information:

• Item Code: 7V11
• Production Capacity: 1000 per month
• Delivery Time: Ready Stock
• Packaging Details: Box Containing 1. Infant Warmer Controller. 2. Skin sensor Probe. 3. Air Sensor Probe. 4. 650W High Quality Ceramic Heater. 5. Supply Transformer. 6. Sensor Male connectors. 7. Wires and Stickers. 8. Switches and Sockets

OPERATING MODES

 SKIN MODE:In Skin mode heater power is controlled with reference to Skin probe. In case when the temperatureexceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.

AIR MODE:In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceedsMax ( 38 °C or 101 °F) in any probe Heater is turned off.

MANUAL: MODEIn manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed)and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 101 °F) inany probe Heater is turned off. Special attention is needed while operating without probes.

DISPLAY INDICATION
 LCD:LCD displays the following information.I. Current ModeII. Heating speedIII. Alerts: Low Temp, High Temp, Probe failIV. Settings: Set Temp, Low Alarm, High Alarm, Manual mode timer, Calibration, Product brandingV. APGAR timer

7 SEGMENT DISPLAY(1 inch Large Display):Displays current Skin and Air temperature, blinks for out of range (Low and high alarm) and clears uponprobe fail.

ALERTS

 Power fail: Power fail indicator turns ON with sound alert (cannot be muted).

Probe fail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp display.

Heater overload: Heater overload indicator turns ON.

Low temperature: Low alarm indicator turns ON with sound alert (can be muted). Displays blinks.

High temperature: High alarm indicator turns ON with sound alert (can be muted). Displays blinks.

Manual mode Time out: Short sound alert and timer flashing on LCD.

Additional Information:

• Production Capacity: 1000
• Delivery Time: Ready Stock
• Packaging Details: Box Containing 1. Infant Warmer Controller. 2. Skin sensor Probe. 3. Air Sensor Probe. 4. 650W High Quality Ceramic Heater. 5. Supply Transformer. 6. Sensor Male connectors. 7. Wires and Stickers. 8. Switches and Sockets

OPERATING MODES -
SKIN MODE: In Skin mode heater power is controlled with reference to Skin probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off. 
AIR MODE: In Air mode heater power is controlled with reference to Air probe. In case when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off.
MANUAL: MODE In manual mode user can control heater manually. In this mode user can adjust heating speed (0 to 8 speed) and set timer upto 59min. With probes installed when the temperature exceeds Max ( 38 °C or 101 °F) in any probe Heater is turned off. Special attention is needed while operating without
ALERTS
Power fail: Power fail indicator turns ON with sound alert (cannot be muted).
Probe fail: Probe fail indicator turns ON with sound alert (can be muted). Displays “-.-.-“on temp display.
Heater overload: Heater overload indicator turns ON.
Low temperature: Low alarm indicator turns ON with sound alert (can be muted). Displays blinks.
High temperature: High alarm indicator turns ON with sound alert (can be muted). Displays blinks.
Manual mode Time out: Short sound alert and timer flashing on LCD.
 

Manufactured in Mumbai, Maharashtra, India

We deal in Andhra Pradesh, Arunachal Pradesh, Assam,Bihar, Patna, Chhattisgarh, Raipur, Goa, Panaji, Gujarat, surat, ahemdabad, baroda, Gandhinagar, Haryana, Chandigarh, Himachal Pradesh, Shimla, Jharkhand, Ranchi, Karnataka, Bangalore, Kerala,Thiruvananthapuram, Madhya Pradesh, Bhopal, Maharashtra, Mumbai, Manipur, Imphal, Meghalaya, Shillong, Mizoram, Aizawl, Nagaland, Kohima, Odisha, Bhubaneshwar, Punjab, Chandigarh,Rajasthan, Jaipur, Sikkim, Gangtok, Tamil Nadu, Chennai, Telangana, Hyderabad, Tripura, Agartala, Uttarakhand, Dehradun, Uttar Pradesh, Lucknow, West Bengal